Workshop Automotive Battery Charger - 6/12/24V 21,000mA

Special Price $1,000.62 Regular Price $1,053.29
In stock
SKU
HDBC35
Workshop Automotive Battery Charger - 6/12/24V 21,000mA is available to buy in increments of 1

Projecta HDBC35 Workshop Automotive Battery Charger 6/12/24V 21,000mA

Multi Voltage Operation
Suitable for charging 6, 12 or 24 Volt batteries.
Manual Charge
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state.
0-14 Hour Timer
Automatically turns the battery charger off after set time. Can be set at 60 min intervals.
Engine Start
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery.
Thermal Overload/Polarity Protection
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety.
* The term "35A" as opposed to "21,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.
SPECIFICATIONS
PART NO. HDBC35
TYPE Manual and Automatic
INPUT 240V, 50Hz, 550W
OUTPUT 21,000mA (35A RMS*) at 6.0V,
21,000mA (35A RMS*) at 12.0V,
13,500mA (22A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off
85A at 3.6V / 85A at 7.2V / 45A at 14.4V
CHARGE CONTROL
Cut out: 7.1V / 14.2V / 28.4V
Cut in: 6.7V / 13.4V / 26.8V
Start: 0.0V / 0.0V / 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON
Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON
Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE CHARGE TIME
AUTOMOTIVE 6, 12,24V 550-2000CCA
4-10 hrs
MARINE 6, 12,24V 700-2500MCA
5-12 hrs
DEEP CYCLE 6, 12,24V 75-250Ah 5-12 hrs
EXTRAS
Specifications
Instructions
More Information
Manufacturer Projecta
Barcode 09315219802811
Type of Store Credit value Select
Write Your Own Review
You're reviewing:Workshop Automotive Battery Charger - 6/12/24V 21,000mA