DPDT 12V Int. Motor reversing twin Relay

In stock
DPDT 12V Int. Motor reversing twin Relay is available to buy in increments of 1

Cole Hersee 24452BX DPDT 12V Int. Motor reversing twin Relay

Cole Hersee 24452BX DPDT 12V Int. Motor reversing twin Relay

70A at 12V DC.

Carries a heavy load and is suitable for intermittent or continuous operation at 12V DC. Ideal for tarping or lift applications as well as for hoists, hatches, winches/windlasses, snowplows, intake/exhaust fans, vehicle outriggers and multiple forward-reverse applications.

Fully sealed to accommodate harsh environments. Dynamic braking stops the motor when the control switch is turned to Off. Low profile module (less than 2" high) saves space in cramped installations, and is easy to retrofit.

Description Forward-Reverse Module
Intermittent Rating 70A at 12V DC max On 5mins Off 3 mins
Control switch for intermittent On-Off-On (not supplied)
Continuous Rating 50A at 12V DC
Control switch for continuous Mom On-Off-Mom On (not supplied)
Terminals Tin-plated brass studs
Load current inrush 150A
Size 2.91 x 3.51 x 1.86"H (73.9x91.7x47.2mm)
Contacts High performance silver tin oxide
Coil resistance 82 Ohms plus/minus 10%
Temperature range -40C to 85C
Sealed to IP67
Ignition protected Yes



Dynamic braking when switch turned OFF, low profile

  • Heavy load current, dielectric strength 500V RMS
  • Fully sealed for harsh environment, rust and moisture resistant plastic housing, tin plated brass studs, vibration resistance: 10-55Hz
  • For intermittent operation use switch: Mom ON-OFF-Mom ON
  • For continuous use switch: ON-OFF-ON
  • Ideal for tarp, hoist, winch, fans or other reversing applications
  • Automatically reverses direction of motors
More Information
Manufacturer Cole Hersee
Write Your Own Review
You're reviewing:DPDT 12V Int. Motor reversing twin Relay
Your Rating
a141 (63.56 kB)