Lightforce CBSWM On Off Switch to suit Mitsubishi Pajero, Triton, Challanger
A dedicated switch suitable for a number of Mitsubishi vehicles - Pajero, Challenger, Triton and some Evo models utilising the existing factory switch locations.
Will fit Mitsubishi models that incorporate the same Automatic Stability Control switch type as shown, this switch is available with two different icons (see images). Any vehicle using this existing ASC switch will be able to fit the new switch without any modification to the dash.
This non genuine switch has a maximum current rating of 3 amps @ 12 volts and should be used in conjunction with a relay if current will exceed 3 amps.
- Lightforce Roo logo illuminates via the dash light circuit, once the switch is pushed on a second indicator is also activated
- Supplied with 500mm length harness
- Available in momentary (On) - Off and latching On - Off configuration
- Part number CBSWM
1: Red with black stripe - From 12 volt positive high beam supply (Connect to brown wire on Lightforce harness)
2: Green with yellow stripe - To 12 volt positive (85) relay (Connect to black with red stripe on Lightforce harness)
3: Blank not used: red with black stripe - From 12 volt dash light circuit
5: Black - To vehicles earth (negative)